8060W 3600L/H 5400L/H Ro Uf Filter Membrane Uf Water Treatment

8060W Ulta-filtration Membrane Modules for Purified Water Treatment with Pore Size 0.03um PVDF material

An ultrafiltration membrane is a membrane that effects separation on the principle of sieving. The membrane has pores that are in the nanometre size range, and will therefore prevent particles, colloids, microorganisms and dissolved solids that are larger in dimension than the pores in the membrane surface from passing. The membrane therefore acts as a physical, size-exclusion barrier, and it is for that reason that ultrafiltration membranes produce such a high quality product.

Ultrafiltration membranes are produced in either flat-sheet or tubular-type geometries. The membranes that were used in this study are referred to as capillary membranes. The membranes are narrow-bore tubes that have an outside diameter of 1.8 mm and a lumen (bore) diameter of 1.2 mm. The membranes are internally skinned, which means that the pre-treated feed water enters into the lumen from where it filters outwards under a pressure driving force. The trans-membrane pressure required to produce clean-filtered and disinfected water is typically less than 200 kPa, typically 120 kPa.

The structure as the following:2.2.2 type A of 8 inches UF module.

The whole installation and application process of our MBR modules are described as the following photo:

8060W ro uf filter Membrane

3600L/H ro uf filter

5400L/H uf water treatment

8060W 3600L/H 5400L/H Ro Uf Filter Membrane Uf Water Treatment Images